Specifications 911 Turbo*

Body:
Coupé; monocoque structure; lightweight all-steel bodyshell hotgalvanised
on both sides; doors and bootlid made of aluminium;
full-size thorax and head airbags for the driver and front passenger,
2+2-seater.

Aerodynamics:
Drag coefficient: Cd = 0.31
Frontal area: A = 2.04 m2
Cd x A = 0.63

Power Unit:
Six-cylinder aluminium boxer engine; water-cooled; engine block
and cylinder heads made of aluminium; four over-head camshafts;
four valves per cylinder; adjustment of valve timing on
the intake camshaft and modification of valve lift (VarioCam Plus);
hydraulic valve play compensation; two exhaust gas turbochargers
with variable turbine geometry; two intercoolers; dry sump lubrication;
threeway catalytic converter; dual oxygen sensor control;
engine oil capacity 11 litres/2.42 Imp gals; coolant 25 litres/5.5
Imp gals; DME Digital Motor Electronics management of the ignition,
fuel injection and camshaft; electronic ignition with solidstate
distributor (six coils); two hot-film air mass meters, sequential
multipoint fuel injection.

Bore:
100 mm/3.94"
Stroke:
76.4 mm/3.01"
Capacity:
3600 cc
Compression Ratio:
9.0:1
Engine Output:
353 kW/480 bhp at 6000 rpm
Max Torque:
620 Nm/457 lb-ft from 1950 - 5000 rpm
With Overboost: 680 Nm/501 lb-ft from 2100 - 4000 rpm
Output per Litre:
98.1 kW/133.4 bhp
Max Engine Speed:
6750 rpm
Fuel Grade: Premium plus (RON/MON 98/88), unleaded
Electrical System:
12 V, 2100 W alternator, battery capacity 70 Ah

* Specifications may vary according to national homologation standards

Power Transmission:
Engine and transmission bolted together to form a common drive
unit; four-wheel drive with electronically controlled and electromagnetically
operated multiple-plate (PTM) single-plate; hydraulically
assisted dry clutch.

Final drive ratio: 3.44 (rear), 3.33 (front)
Clutch diameter: 240 mm/9.45"

Chassis and suspension:
Front axle: Spring strut configuration (optimised by Porsche)
with wheel-guiding spring strut axle and independent suspension
on track control and longitudinal arms; longitudinal arms and
spring struts; conical stump springs with inner dampers; actively
controlled twin-sleeve gas pressure dampers (PASM).
Rear axle: Multi-arm axle, wheels mounted independently on five
arms; cylindrical coil springs with coaxial, inner-mounted dampers;
actively controlled single-sleeve gas pressure dampers (PASM).

Brakes:
Two-circuit brake system with one circuit on the front, one on
the rear wheels; six-piston aluminium monobloc brake callipers
at the front; cross-drilled, inner-v ented brake discs measuring
350 x 34 mm (13.78 x 1.34") diameter x width; four-piston
aluminium monobloc brake callipers at the rear; cross-drilled,
inner-vented brake discs measuring 350 x 28 mm (13.78 x 1.10")
diameter x width; PSM 8.0; vacuum tandem brake servo.

Wheels and Tyres:
Front 8 1/2 J x 19 on 235/35 ZR 19 ET 56
Rear 11 J x 19 on 305/30 ZR 19 ET 51

Weight:
Unladen, DIN 1585 kg/3495 lb (1620 kg/3572 lb)
Max permissible 1950 kg/4300 lb (1980 kg/4366lb)
Roof load 75 kg/165 lb

Dimensions:
Length 4450 mm/175.2"
Width 1852 mm/72.9"
Height 1300 mm/51.2"
Wheelbase 2350 mm/92.5"
Track front 1490 mm/58.7"
rear 1548 mm/60.9"
Luggage compartment capacity to VDA standard: 105 litres (3.68 cu ft), overall
Tank capacity: 67 litres (14.74 Imp gals)

Performance:
Top speed 310 km/h (192 mph)

Acceleration*:
0 - 100 km/h in sec 3.9 (3.7)
0 - 160 km/h in sec 8.4 (7.8)
0 - 200 km/h in sec. 12.8 (12.2)
Standing-start km in sec 21.5 (21.1)
*Figures in brackets relate to the Tiptronic S model Specifications

Fuel consumption*
(EU Standard):
Urban 18.8 (19.8) litres/100 km
Extra-urban 9.5 (9.6) litres/100 km
Composite 12.8 (13.6) litres/100 km

CO2 emissions*
(EU Standard):
307 (326) g/km
*Figures in brackets relate to the Tiptronic S model

© Copyright 2004-2012 - Cars International GmbH - Site by tdesign