Specifications 911 Carrera Cabriolet*
Body:
Cabriolet; monocoque construction; lightweight all-steel body hot-galvanised on both sides; full-size frontal, side and head airbags for driver and front passenger; number of seats 2+2.
Aerodynamics:
Drag coefficient: Cd = 0.30
Frontal area: A = 2.01 m2
Cd x A = 0.60
Power Unit:
Six-cylinder aluminium horizontally-opposed power unit, watercooled; engine block and cylinder heads made of aluminium; direct fuel injection (DFI); four overhead camshafts; four valves per cylinder; variable valve timing (VarioCam Plus); hydraulic valve play compensation; integrated dry sump lubrication with on demand oil pump; engine oil 10 litres (2.2 imp gals); coolant 28.9 - 31.5 litres (6.4 - 6.9 imp gals); double-chamber exhaust system with pre-catalyst and main catalyst close to engine; oxygen sensor control with two pre- and two downstream catalyst sensors; Digital Motor Electronics SDI 3.1; sequential management of high-pressure injectors; three-piston axial highpressure pump with electrical volume control valve.
Bore: 97 mm/3.82"
Stroke: 81.5 mm/3.21"
Capacity: 3614 cc
Compression ratio: 12.5:1
Engine output: 254 kW/345 bhp at 6500 rpm
Max Torque: 390 Nm/287 lb/ft at 4400 rpm
Output per Litre: 70.3 kW/95.6 bhp
Max engine speed: 7500 rpm
Fuel grade: Premium plus, (RON/MON 98/88), unleaded
Electrical System: 12 V; 2100 W alternator; battery capacity 70 Ah
* Specifications may vary according to market requirements
Power Transmission:
Engine and transmission bolted together to form one drive unit; power transmission via double universal shafts to rear wheels.
| Gear ratios: | Manual | PDK transmission |
| 1st | 3.91 | 3.91 |
| 2nd | 2.32 | 2.29 |
| 3rd | 1.56 | 1.65 |
| 4th | 1.28 | 1.30 |
| 5th | 1.08 | 1.08 |
| 6th | 0.88 | 0.88 |
| 7th | – | 0.62 |
| Reverse | 3.59 | 3.55 |
| Final drive: | 3.44 | 3.44 |
| Clutch diameter: | 240 mm | 202 mm / 153 mm |
| 9.45” | 7.95” / 6.02” |
Chassis and Suspension:
Front axle: McPherson axle optimised by Porsche, spring strut axle with independent wheel suspension on track control arms, longitudinal arms and spring struts; conical stump springs with inner damper, twin-sleeve gas-pressure dampers.
Rear axle: Multi-arm axle with independent wheel suspension on five track control arms; cylindrical coil springs on each wheel with co-axial, inner damper; single-sleeve gas-pressure dampers.
Brakes:
Two-circuit brake system split front-to-rear; four-piston aluminium monobloc brake callipers; cross-drilled, inner-vented brake discs on the front axle measuring 330 x 28 mm/12.99 x 1.10" diameter x width and 330 x 28 mm/12.99 x 1.10" at the rear; PSM 8.0; vacuum brake servo.
Wheels and Tyres:
front 8 J x 18 on 235/40 ZR 18
rear 10,5 J x 18 on 265/40 ZR 18
Weight:
Weight, unladen to DIN 1500 kg/3308 lb
Max permissible 1880 kg/4145 lb
Dimensions:
Length 4435 mm/174.6"
Width 1808 mm/71.2"
Height 1310 mm/51.6"
Wheelbase 2350 mm/92.5"
Track front 1486 mm/58.5"
rear 1534 mm/60.4"
Luggage capacity to VDA: 135 litres/4.73 cu ft, overall
Tank capacity: 64 litres/14.1 imp gals
Performance:
Top speed 289 (287)* km/h - 179 (178)* mph
*Figures in brackets relate to vehicles with PDK transmission
Acceleration in sec
0 - 100 km/h 5.1 (4.9)
0 - 160 km/h 11.1 (10.8)
0 - 200 km/h 17.5 (17.2)
Standing-start km 23.9 (23.6)
Fuel Consumption
(EU 5):
Urban 15.6 (14.9) ltr/100 km
Extra-urban 7.5 (7.0) ltr/100 km
Combined 10.4 (9.9) ltr/100 km
CO2 Emissions
(EU 5): 245 (233) g/km